Pricing & Options for the Norfolk Oyster


Base price: £48,000

inclusive of VAT at 20%

Standard Specification

All Norfolk Oysters come with the following:

  • Sturdy simulated clinker glass fibre hull
  • Hull and deck built to extremely high standards using the best quality isophthalic resins and gelcoats.
  • Clear gelcoat bellow waterline
  • Moulded oar stowage in sole
  • Hard wood protection bellow the water line for centre board case
  • Built-in buoyancy
  • 2 large watertight forward lockers (with provision for outboard engine stowage) with brass hinged GRP watertight lids
  • Spruce spars (mast/boom/gaff)
  • Tan Dacron mainsail & jib with slab reefing
  • All running & standing rigging, best quality, stainless steel wire & pre-stretched polyester rope
  • Manual bilge pump
  • Custom made stem head fitting
  • Custom made outboard motor bracket
  • 3 mooring cleats and fairleads
  • Teak rudder with lifting blade
  • Oak tiller
  • Galvanised centreboard with winch
  • Solid wood sole boards
  • Sturdy teak seat over centreboard case
  • Teak rubbing strakes
  • Cove line on top strake
  • Outboard drain for seating and decks
  • Galvanised tabernacle (easy mast lowering)
  • Non slip surfaces on all deck surfaces
  • Comprehensive Owners Manual with detailed sketches covering rigging, sailing and maintenance.

Optional extras

The Norfolk Oyster can also be ordered with the following extras:

  • Transport
    • Galvanised break-back road trailer, complete with winch, hitch lock, cable, sparewheel and lighting board
    • 5ft 13 pin LED Lighting board
    • 6ft 7 pin LED Lighting board
    • 6ft 7 pin Lighting board
    • Number plate GB
    • 3 x Ratchet straps
    • 195s Wheel Clamp
    • Bearing savers
    • Spare bulb kit
    • 7 pin socket tester
    • 13 pin socket tester
    • Emergency triangle
    • Tyre pressure gauge
    • Emergency tyre repair foam
    • Bottle jack
  • Alternative propulsion
    • Outboard engine (Honda 2.3 hp long shaft)
    • Fuel can for outboard engine
    • Electric Torqeedo outboard 6hp equivalent
    • Outboard lock
    • Hardwood outboard motor dummy
    • 1 pair oars complete with bronze rowlocks and bronze rowlock plates
  • Interior
    • Full length hardwood slatted seats and aft sole
    • Brass bilge drain bung
    • Brass protection on aft deck edge and forward rubbing strakes in line with fairleads
  • Exterior
    • Brass keel band protection for keel and bilge runners
    • Full epoxy osmosis protection coating BWL
    • Primer and 2 coats anti-fouling (International uno red)
    • Copper coat epoxy antifouling
    • Signwriting on transom (name and port)
  • Covers
    • Mainsail cover
    • Internal boat cover for use when mast is stepped
    • Overall boat cover for use when mast is down
    • Spray hood
  • Storage
    • 3 cave lockers for additional stowage
    • Locker under aft deck with water tight hatches
    • Brass padlock for forward locker
  • Sailing
    • Head Sail Reefing
    • Genoa (useful for winds below force 4)
    • Topping lift/lazy jacks for mainsail
    • Hardwood boom gallows with storage in forward locker
    • Bronze shroud plates and fairleads in lieu of standard galv
    • Copper protection on mast for gaff jaws (1 for full sail, 1 for first reef, 1 for second reef)
    • Jamming block for main sheet in lieu of standard block
    • Swivel cleats in leu of standard Jib cleats
    • Snap shackles on jib tack and halyard for easy handling
    • Mast rake board
    • Longer tiller (useful for single-handed sailing)
    • Tiller extension (plastic)
    • Tiller extension (wooden)
  • Mooring
    • Galvanised anchor fitted in teak chocks on foredeck
    • Anchor only
    • 20m of 10mm anchor warp
    • 6 chubby fenders with lines
    • 10mm multiplait mooring warps inc springs
  • Flags
    • Gunmetal flag staff socket mounted on aft deck
    • Teak flag staff
    • Red sewn ensign
    • Flag halyard on mast (including burgee)
  • Miscellaneous
    • Telescopic boat hook and whisker pole mounted in forward locker
    • Ritchie 587 Compass on centre case
    • Flare pack (coastal)
    • Flare pack (inshore)
    • Automatic Life jacket Navy or Red 150n
    • Sailing gloves
  • Extra special and Super yacht tender
    • Detailed standing rigging
    • Leather stitched main sheet boom strop
    • Leather stitched Gaff span and throat strop
    • Sail cover in Sunbrella linen flock
    • Cockpit cover in Sunbrella linen flock
    • Over all mast down cover in Sunbrella linen flock and embroided with boat name
    • Teak cockpit sole
    • Awlgrip metallic paint top strake only
    • Awlgrip metallic paint solid top sides
    • Awlgrip boot top
    • Awlgrip paint interior
    • Awlgrip “Awlwood” varnish on all wood
Neil Thompson Boats

Tweets from the yard

© 2013 Neil Thompson Boats